- 119 -
Sets the White Balance mode to [VAR].
≥ Set [VAR] in an Fn button. (l 116)
≥ Switch to Manual Mode. (l 81)
Press the Fn button in the recording screen.
≥ The White Balance Mode changes to [VAR].
≥ If you touch an Fn button while setting the White Balance Mode, the screen to adjust [VAR] is
displayed. (l 82)
≥ Pressing the Fn button once again changes the White Balance Mode to .
≥ This function is not available in the following cases:
j In Intelligent Auto Mode/Intelligent Auto Plus Mode
j When [SCENE MODE] is set to (Beach)/ (Sunset)/ (Fireworks)/ (Night
Scenery) (l 72)
WB SETTING : VAR
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 119 ページ ２０１８年２月２２日 木曜日 午後１２時３０分
To Next Page
Loading...
