- 198 -
Playing back on a TV
You can play back the scenes and still pictures recorded with or stored in this unit on a TV.
≥ The following scenes can be played back:
j Scenes recorded in AVCHD
j Scenes recorded as Backup for Twin Camera
j Scenes recorded in MP4 [720]
j Scenes saved in MP4 (1280k720/25p) or MP4 (640k360/25p)
≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Set Wireless Access Point] in
[Wi-Fi Setup] (l 212 to 215).
1 Press Wi-Fi button on this unit.
2 Touch [DLNA Play] on the Wi-Fi menu screen.
≥ If you touch [Change AP], you can switch the wireless access point to another one that has been
registered to this unit.
≥ If you touch [CANCEL], the Wi-Fi connection is cancelled.
≥ When the connection to this unit is complete, the screen of this unit turns off. To display it again,
touch the screen.
3 Select this unit (SSID) by the TV side.
≥ Select the media ([SD/MEM]) and select the motion picture ([AVCHD/MP4]) or still picture
([JPEG]) to play back.
4 Perform playback operations with the TV remote control.
≥ You cannot play back the following scenes:
j (For the series/ series/ series)
Scenes recorded in 4K MP4
j Scenes recorded in 24p
j Scenes recorded with [1080/50M] or [1080/28M] of [MP4]
j Scenes saved in MP4 (1920k1080/25p)
≥ Depending on your environment, such as the network condition, scenes may not be played back
smoothly.
≥ Playback operations may differ depending on the TV in
use.
≥ The following operations can be performed if a colour
button is pushed.
Blue/Red: Skip playback
≥ Fast forward/Fast rewind playback cannot be performed.
≥ You cannot perform playback operations with this unit.
To exit [DLNA Play]:
Touch [EXIT] or press Wi-Fi button.
≥ A message is displayed. Touch [YES] to exit.
(Examples of operations during
motion picture playback)
A Skip playback
B Stop
C Playback/Pause
VXF1
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 198 ページ ２０１８年２月２２日 木曜日 午後１２時３０分
To Next Page
Loading...
