- 162 -
Connecting with an HDMI micro cable
Select the desired method of HDMI output.
(For the series/ series/ series)
≥ [AUTO] determines the output resolution automatically based on information from the connected
TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method [2160p],
[1080p], [1080i] or [576p] which enables the images to be displayed on your TV. (Please read the
operating instructions for the TV.)
≥ Images may not be displayed on the television for several seconds in some cases, such as when
changing between scenes.
≥ Even if you select [2160p], images are output in 1080p in the following cases:
j When this unit is connected to a TV that does not support 4K motion picture
j When [REC FORMAT] is set to [AVCHD] or [MP4] in Recording Mode
j When [REC FORMAT] is set to [24p] and [REC MODE] is set to [1080/24p] in Recording Mode
j When a scene other than a [4K MP4] or [2160/24p] scene is played back in Playback Mode
j When you start a 4K Cropping preview in Playback Mode
j When this unit is set to Still Picture Recording Mode or when you play back a still picture
≥ You can output 2160/24p scenes
*1
in 24 frames per second by connecting this unit to a TV that
supports 4K motion picture and setting [HDMI RESOLUTION] to [AUTO] or [2160p].
However, the scenes cannot be output in 24 frames per second in the situations below. They will
instead be output in 1080/60p, 1080/60i or 480/60p. (The setting varies depending on the
specifications of the TV and the [HDMI RESOLUTION] setting.)
j When this unit is connected to a TV that does not support 4K motion picture
j When [HDMI RESOLUTION] is set to a setting other than [AUTO] or [2160p]
≥ 1080/24p scenes
*2
cannot be output in 24 frames per second and instead they will be output in
1080/60p, 1080/60i or 480/60p. (The setting varies depending on the specifications of the TV and
the [HDMI RESOLUTION] setting.)
*1 In Recording Mode: When [REC FORMAT] is set to [24p] and [REC MODE] is set to [2160/24p]
In Playback Mode: When 2160/24p scenes are played back
*2 In Recording Mode: When [REC FORMAT] is set to [24p] and [REC MODE] is set to [1080/24p]
In Playback Mode: When 1080/24p scene are played back
(For the series)
≥ [AUTO] determines the output resolution automatically based on information from the connected
TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p],
[1080i] or [576p] which enables the images to be displayed on your TV. (Please read the
operating instructions for the TV.)
≥ Images may not be displayed on the television for several seconds in some cases, such as when
changing between scenes.
≥ 1080/24p scenes
*
cannot be output in 24 frames per second and instead they will be output in
1080/60p, 1080/60i or 480/60p. (The setting varies depending on the specifications of the TV and
the [HDMI RESOLUTION] setting.)
* In Recording Mode: When [REC FORMAT] is set to [24p] and [REC MODE] is set to [1080/24p]
In Playback Mode: When 1080/24p scene are played back
: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[2160p]/[1080p]/[1080i]/[576p]
: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[576p]
VXF1
VX1
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 162 ページ ２０１８年２月２２日 木曜日 午後１２時３０分
To Next Page
Loading...
