- 54 -
You can minimise the loss of gradations in bright areas and dark areas when, for example,
the contrast between the background and the subject is large.
≥ This unit will be set to Intelligent Auto Mode if you turn it off and on.
≥ This function is not available in the following cases:
j During motion picture recording
j When [REC FORMAT] is set to [4K MP4]
*
or [24p].
j When the Recording Mode is set to 4K Photo Mode
*
j When the Wireless Twin/Multi-Camera function is in use
* For the series/ series/ series
≥ [REC MODE] is set to [1080/28M] in the following cases:
j When [REC FORMAT] is set to [MP4] and [REC MODE] is set to [720]
≥ The following settings are cancelled:
≥ You cannot record still pictures.
≥ The shutter speed and brightness (iris/gain) are adjusted automatically. If you set them manually
in advance, the settings will not be maintained.
≥ Depending on recording conditions, the screen may flicker or you may see horizontal bars in the
image.
≥ If you record a moving subject or move this unit quickly while recording, the image may be
distorted.
∫ To set the desired Fn button as the HDR button
( series/ series)
You can also change the [FN BUTTON SETTING] so you can use the desired Fn button as an HDR
button. (l 115)
Advanced (Recording)
HDR Movie Mode
HDR button
You can switch from Recording mode to HDR Movie
Mode by pressing this button.
≥ Press it once more to switch from HDR Movie Mode to
Intelligent Auto Mode.
≥ It is also possible to switch to HDR Movie Mode by
touching the Recording Mode button icon. (l 64)
j [FACE FRAMING]
j Auto Slow Shutter
j Backlight Compensation
j Intelligent Contrast Control
j Night Mode
j Digital Cinema Colour
j [PICTURE ADJUST]
j [HYBRID O.I.S.]
j [ACTIVE CONTRAST]
(For the series/ series)
j [CUSTOM AF]
(For the series)
j Twin Camera
: [SETUP] # [FN BUTTON SETTING] # [Fn1] to [Fn4] # [ ]
ラュン
WXF1
VX1
WXF1
WXF1
WXF1 VXF1
MENU
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 54 ページ ２０１８年２月２２日 木曜日 午後１２時３０分
To Next Page
Loading...
