- 206 -
∫ About the screen indications in the Live Cast Mode
≥ Recording is performed in Intelligent Auto Mode.
≥ In Live Cast Mode, [REC FORMAT] is set to [AVCHD], and [REC MODE] (l 208) is set to [PH]/
[HA]/[HG]/[HE].
≥ If you record an image when the LCD monitor of this unit is closed with the screen facing outward,
the LCD monitor turns off.
≥ If this unit is on the e-mail sender block list of destination devices or if their firewall setting is
enabled, the Wi-Fi function may not work correctly when you send an e-mail. If this occurs, check
the network settings.
≥ When the live broadcast cannot be watched on a USTREAM application for TVs or smartphones,
cancel the Password for the Programme, and restart the broadcast.
≥ Image content may be leaked to third parties depending on the USTREAM image publication
method settings. Set the publication range and Password using USTREAM if required.
/ Live broadcast indication
Line quality (l 207)
1h23m Elapsed time of the live broadcast
10fps Frame rate (l 207)
Number of people watching the live
broadcast
≥ Up to 9999 viewers can be
indicated. The indication does not
appear when the number is 0.
E-mail delivery setting
Live broadcast microphone setting
(l 208)
≥ The indication appears when
[Microphone On Air] is set to
[OFF].
Configuring the live broadcast settings
Touch to display the live broadcast setting
screen.
≥ / / will disappear when no touch function is
performed for a specific period of time. To display them again,
touch the screen.
A [EXIT]
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 206 ページ 2018年2月22日 木曜日 午後12時30分