To Next PageTo Next PageWhy are images or sounds not output even when my Panasonic HC-WX970 is connected to the TV by the HDMI micro cable?
If you're not getting images or sounds when your Panasonic Camcorder is connected to the TV via HDMI, ensure the HDMI micro cable is correctly and fully inserted.
What to do if my Panasonic HC-WX970 Camcorder unit is turned off automatically?
If your Panasonic Camcorder turns off automatically when you turn off the TV using the TV remote, it may be due to the VIERA Link function. If you are not using VIERA Link, disable it by setting [VIERA Link] to [OFF].
What to do if my Panasonic Camcorder is not operating normally?
If your Panasonic Camcorder is on but not responding, try removing the battery or AC adapter, waiting about a minute, and then reconnecting it. After another minute, power the unit on again. Note that doing this while the media is being accessed could damage the data. If the issue persists, disconnect the power and consult the dealer from whom you purchased the camcorder.
What to do if my Panasonic Camcorder is on but not working?
If your Panasonic Camcorder is not operating normally or cannot be operated even when turned on, remove the battery or AC adapter, wait about 1 minute, and then reconnect it. Wait another minute before turning the unit on again. If the issue persists, disconnect the power and consult the dealer from whom you purchased the unit.
What to do if the SD card from my Panasonic HC-WX970 Camcorder is not recognized in another device?
If an SD card is not recognized when inserted into another device, ensure that the device is compatible with the capacity or type of SD card (SD Memory Card/SDHC Memory Card/SDXC Memory Card).
Why does mosaic-like noise appear on the recording screen with the smartphone, and the image movement does not look smooth on my Panasonic Camcorder?
When your Panasonic Camcorder is set to certain recording formats or modes, mosaic-like noise may appear on the smartphone screen, and the image movement may not look smooth. Note that recorded images will not be affected.
Why doesn't the auto focus work on my Panasonic Camcorder?
If the Auto Focus function on your Panasonic Camcorder isn't working, switch to Intelligent Auto Mode or Intelligent Auto Plus Mode. If you're recording a scene that's hard to focus on in Auto Focus Mode, use Manual Focus Mode to adjust the focus.
How to fix Auto Focus function if it does not work on my Panasonic Camcorder?
If the Auto Focus function is not working on your Panasonic Camcorder, switch to Intelligent Auto Mode or Intelligent Auto Plus Mode. If you are trying to record a scene that is difficult to focus on in Auto Focus Mode, use the Manual Focus Mode to adjust the focus.
Why is the battery indicator inaccurate on my Panasonic HC-WX970 Camcorder?
If the remaining battery indication on your Panasonic Camcorder isn't displaying correctly, it's because the indication is an approximation. To recalibrate, fully charge the battery, then fully discharge it, and then charge it again.
Why is my Panasonic HC-WX970 Camcorder not detected when connected via USB?
If your Panasonic Camcorder isn't detecting the connected device via USB cable, and you're using only battery power, try reconnecting with the AC adapter plugged in.
General| Sensor Type | MOS |
|---|---|
| Sensor Size | 1/2.3 inch |
| Optical Zoom | 20x |
| Digital Zoom | 50x |
| Focal Length | 4.08 - 81.6 mm |
| LCD Screen Resolution | 460, 800 dots |
| Touchscreen | Yes |
| Microphone Input | Yes |
| Headphone Jack | Yes |
| Wi-Fi | Yes |
| NFC | Yes |
| Battery Type | Lithium-ion |
| Video Resolution | 3840 x 2160 |
| Stabilization | Hybrid Optical Image Stabilizer |
| Display | 3.0" LCD |
| Viewfinder | Yes |
| Recording Format | AVCHD / MP4 |
| Frame Rate | 60p / 30p |
| Audio Recording | Dolby Digital |
| USB | USB 2.0 |
| HDMI | Yes |
| Effective Pixels | 6.03 MP |
