To Next PageTo Next PageWhy are images or sounds not output even when my Panasonic Camcorder is correctly connected to a TV?
If you're not getting images or sound when your Panasonic Camcorder is connected to a TV, consult your TV's operating instructions to select the correct input channel. Adjust the [TV ASPECT] setting on the camcorder to match the TV's aspect ratio. Note that during playback, audio is output from the TV, not the camcorder; adjust the sound on the TV.
Why are images or sounds not output even when my Panasonic HC-WX970 is connected to the TV by the HDMI micro cable?
If you're not getting images or sounds when your Panasonic Camcorder is connected to the TV via HDMI, ensure the HDMI micro cable is correctly and fully inserted.
What to do if my Panasonic Camcorder is not detected by other devices when connected by the USB cable?
If your Panasonic Camcorder is not being detected by other devices when connected via USB cable, and you are only using the battery, try reconnecting it using the AC adapter.
What to do if my Panasonic Camcorder is not operating normally?
If your Panasonic Camcorder is on but not responding, try removing the battery or AC adapter, waiting about a minute, and then reconnecting it. After another minute, power the unit on again. Note that doing this while the media is being accessed could damage the data. If the issue persists, disconnect the power and consult the dealer from whom you purchased the camcorder.
What to do if my Panasonic Camcorder is on but not working?
If your Panasonic Camcorder is not operating normally or cannot be operated even when turned on, remove the battery or AC adapter, wait about 1 minute, and then reconnect it. Wait another minute before turning the unit on again. If the issue persists, disconnect the power and consult the dealer from whom you purchased the unit.
Why does my Panasonic Camcorder turn off automatically?
If your Panasonic Camcorder is turning off automatically, it might be due to the VIERA Link feature. If you're not using VIERA Link, disable it in the settings by setting [VIERA Link] to [OFF].
What to do if my Panasonic HC-WX970 Camcorder unit cannot be operated even though it is turned on?
If your Panasonic Camcorder is on but not operating correctly, remove the battery or AC adapter, wait about a minute, and then reconnect it. Wait another minute, and turn the unit on again. If normal operation is still not restored, detach the power connected, and consult the dealer who you purchased this unit from.
What to do if my Panasonic HC-WX970 Camcorder arbitrarily stops recording?
If your Panasonic Camcorder stops recording unexpectedly, ensure that you are using an SD card suitable for motion picture recording. If the data writing speed has deteriorated or after repeated recording and deletion, format the SD card or built-in memory using the unit. Also, if [AGS] is set to [ON], either record in the normal horizontal position or set [AGS] to [OFF].
Why my Panasonic Camcorder won't turn on or the battery drains fast?
If your Panasonic Camcorder cannot be turned on, does not stay on long enough, or the battery runs down quickly, try charging the battery again to ensure it is sufficiently charged. In cold environments, battery life may be shorter. Note that batteries have a limited lifespan and may need replacing if operating time remains short after a full charge.
Why is the battery indicator inaccurate on my Panasonic HC-WX970 Camcorder?
If the remaining battery indication on your Panasonic Camcorder isn't displaying correctly, it's because the indication is an approximation. To recalibrate, fully charge the battery, then fully discharge it, and then charge it again.
General| Sensor Type | MOS |
|---|---|
| Sensor Size | 1/2.3 inch |
| Optical Zoom | 20x |
| Digital Zoom | 50x |
| Focal Length | 4.08 - 81.6 mm |
| LCD Screen Resolution | 460, 800 dots |
| Touchscreen | Yes |
| Microphone Input | Yes |
| Headphone Jack | Yes |
| Wi-Fi | Yes |
| NFC | Yes |
| Battery Type | Lithium-ion |
| Video Resolution | 3840 x 2160 |
| Stabilization | Hybrid Optical Image Stabilizer |
| Display | 3.0" LCD |
| Viewfinder | Yes |
| Recording Format | AVCHD / MP4 |
| Frame Rate | 60p / 30p |
| Audio Recording | Dolby Digital |
| USB | USB 2.0 |
| HDMI | Yes |
| Effective Pixels | 6.03 MP |
