28
VQT2M51
Preparation
Setup
3
Turning the unit on/off
You can turn the power on and off using the power button or by opening and closing the LCD
monitor.
Press the power button to turn on the power.
A The status indicator lights on.
Power is turned on when the LCD monitor is opened, and power is turned off when it is
closed.
During normal use, opening and closing of the LCD monitor can be conveniently used
to turn the power on/off.
∫ To turn on the power
A The status indicator lights on.
∫ To turn off the power
B The status indicator goes off.
≥ The power will not turn off while recording motion pictures even if the LCD monitor is
closed.
≥ In the following cases, opening the LCD monitor does not turn on the power. Press the
power button to turn on the power.
jWhen the unit is originally purchased
jWhen you have turned off the power using the power button
Turning the power on and off with the power button
Turning the power on and off with the LCD monitor
To turn off the power
Hold down the power button until the status
indicator goes off.
HDCSD60_TM60_HS60-P_PC-VQT2M51_eng.book 28 ページ ２０１０年１月１８日 月曜日 午前１１時３３分
To Next Page
Loading...
