36
VQT2M51
Basic
Recording/
Playback
4
Recording still pictures
1 Change the mode to .
2 Open the LCD monitor.
3 Press the button
halfway. (For Auto focus
only)
4 Press the button fully.
Focus indication:
≥ If you set the Optical image stabilizer function (l 52) to / (MODE1), then the
Image Stabilizer function will be more effective. ( (MEGA Optical Image Stabilizer)
will be displayed when the button is pressed halfway.)
≥ In dark environments, the video light will turn on.
≥ Focus indication will change to registered focus icon when [FACE RECOG.] is set to [ON].
(l 64)
≥ Using a flash or tripod is recommended when recording still pictures in dark places
because the shutter speed becomes slow.
≥ The screen will become darker when the button is pressed halfway if the shutter
speed is 1/30 or slower.
A Focus indication
± (The white lamp flashes.):
Focusing
¥ (The green lamp lights up.):
When in focus
No mark:
When focusing is unsuccessful.
B Focus area (area inside brackets)
HDCSD60_TM60_HS60-P_PC-VQT2M51_eng.book 36 ページ ２０１０年１月１８日 月曜日 午前１１時３３分
To Next Page
Loading...
