4. Place the documents on the feed tray ( ) with the side to be scanned facing up. Then push the
documents in the direction of the arrow until they stop.
Notice
• The height of the documents should not exceed the limit mark ( ) on the document guide.
Exceeding the limit mark may cause a paper jam or skewing.
5. Slide the document guides ( ) to match the width of the document to be scanned.
• Move the document guide while pressing the lever ( ) of the document guide.
6. Open your scanning application and scan the documents.
• For details about the application, refer to the help of each application.
• Y
ou can also start up applications automatically to scan documents (Push Scan). For details about
Push Scan, see "4.3 Using Push Scan" (page 35).
4.2 Scanning Documents
29
To Next Page
Loading...
