Panasonic KV-S4065CW - Operation: Document Preparation; Acceptable Documents and Paper Load

Preparing Documents
Acceptable Documents
The acceptable documents for this scanner are as follows.
Document size
48–297 mm
(1.9–11.7 in.)
70*–432 mm
(2.75–17 in.)
* For manual paper feed or thick paper mode:
100 mm (3.9 in.)
Loadable paper thickness and number of sheets
Paper thickness:
Thin 20–50 g/m²
(5–13 lbs.)
Normal 50–157 g/m²
(13–42 lbs.)
Thick 157–209 g/m²
(42–56 lbs.)
Maximum number of sheets loadable on the hopper
Page
thickness
(g/m²)
20
(5 lbs.)
40
(11 lbs.)
50
(13 lbs.)
64
(17 lbs.)
75
(20 lbs.)
80
(21 lbs.)
90
(24 lbs.)
104
(28 lbs.)
157
(42 lbs.)
209
(56 lbs.)
Max.
number of
sheets
500 350 320 300 250 240 210 180 120 100
• The number of sheets listed above is a guideline for when the hopper height is set to "Low" and you are using fresh
paper. For details about the hopper height, see "Changing the Hopper Position" (page 23).
• The number of sheets depends on the paper quality. If a paper feed problem occurs, reduce the number of sheets of the
document loaded on the hopper.
20 Operating Manual
Operation