Panasonic KV-S4085CL - Changing the Scan Background Color; Switching the Reference Plate

Changing the Scan Background Color
By switching the reference plate on the scanner, you can change the scanning background color between
black and white. The default setting is black.
Notice
• Set the front reference plate and rear reference plate to the same color. If the front and rear settings
are different, then documents will not be scanned correctly.
Switching the Reference Plate
1. Set the power switch (
1
) of the scanner to " " (OFF).
• Remove any documents from the exit tray.
1
2. Pull the front door release (
1
) towards you, and open the front door (
2
).
1
2
Operating Manual 41
Operation