113
Bent Paper
Sensor
1. Click “Bent Paper Sensor” on the main menu.
2. Place the Bend Paper Sensor Adjustment Tool(See 14.8.) on
the Feed Tray.
Then push the Bend Paper Sensor Adjustment Tool in the
direction of the arrow untile they stop.
Note : Please select the "Auto"at the manual feed selec-
tor.
3. Lay the Shading Sheet (See 14.8.) on the Bend Paper Sen-
sor Adjustment Tool.
4. Click “Adjust Automatically" to adjust the sensor level.
(Confirm all of the sensor status is “ON".)
5. Click "OK" to return to the main menu.
—
Item Operation Default Remarks
To Next Page
Loading...
