|13 |
INTRODUCTION
KX-F680BX/KX-F2681BX
2. Installing the recording paper
A
1
Open the back lid by lifting up the tabs located
on the both side.
Install a recording paper roll in the unit.
Make sure that the shiny side of the paper is
facing down and there is no stack, tape, or
glue residue on the paper roll.
B
2
incorrectcorrect
1 Insert the leading edge of the recording paper
between the recording paper roller and the
silver plate.
2 Insert the paper under the back lid and pull a
few centimeters of paper out of the unit.
3 Close the back lid by gently pressing down on
both ends, and tear off the excess paper by
pulling it toward you.
Note:
Only use the included roll of paper or specified recording
paper, or else the print quality may be affected and/or
excessive thermal head wear may occur.
To order recording paper.
B
A
Tab
Recording paper roller
Silver plate
Back lid
To Next Page
Loading...
