|12 |
KX-F680BX/KX-F2681BX
Hooks
Triangles
INSTALLATION
1
2
3
4
5
Handset
Handset cord
If you want to use this unit with a handset, install the handset and handset cradle.
To save space or to use the unit mainly for faxes, you may remove the handset cradle.
Even if the handset and handset cradle are not installed, you can make or answer calls using the SP-PHONE button.
When you do not use the handset and handset cradle.
1. Installing the handset cradle
Connect the handset cord.
A Open the front lid by pressing the front lid open
button.
Open the back lid by lifting up the tabs located
on the both side.
B
Insert the handset cradle by matching the triangles.
Place the handset on the handset cradle and close
the lids securely.
Press down the marked on the handset cradle
until clicks in to place.
Make sure the two hooks lock the handset cradle
firmly.
Tab
B
A
Front lid open
button
Triangles
To Next Page
Loading...
