Panasonic KX-F680BX - How to Remove the CCD Unit; How to Remove the Rollers

|109 |
DISASSEMBLED INSTRUCTIONS
KX-F680BX/KX-F2681BX
1) Remove the 2 screws (A).
2) Remove the CCD unit.
Ref. No. 8
Procedure
4 ¤8
HOW TO REMOVE THE CCD UNIT
Ref. No. 9
Procedure
4 ¤5 ¤7
¤8 ¤9
HOW TO REMOVE THE ROLLERS
1) Remove the motor block. (See Ref. No. 7)
2) Remove the stopper with minus screwdriver.
3) Remove the rollers.
4) Remove the gear and stoppers from roller shaft and replace roller.
(A)
CCD UNIT
HOW TO CLEAN:
Clean the glass of CCD
unit with cloth soaked in
alcohol.
STOPPER
DOCUMENT FEED ROLLER
SEPARAION ROLLER
STOPPER
STOPPER
GEAR STOPPER
STOPPER
DOCUMENT FEED ROLLER