Panasonic KX-F680BX - Service Data List; Test Functions

|94 |
KX-F680BX/KX-F2681BX
Set Value
Code
Note:
The above values are default
Rotate the transmission and reception motors to check the
operation of the motors.
Print a test pattern and check the thermal head for
abnormalities (missing dots, etc.), and also check the
operation of the reception motor.
8 5
START
User modePRINT TEST
Test mode
Type of Mode
Code
Operation after
code input.
Function
5 5 6
START
Send four kinds of FAX signals to check the sending function
of the modem.
1) 1100 Hz: Consecutive signal of EOM for tonal.
2) 2100 Hz: G2 carrier signal
Consecutive of CED signal
3) G3, V29 training signal [modulation wave of carrier signal
(1700 Hz)]
5 5 4
START
Service ModeMODEM TEST
Service Mode
MOTOR TEST
LCD CHECK
Service Mode
SCAN CHECK
Service Mode
Turn on the LEDs of the image sensor and operate the read
system.
5 5 5
START
ROM CHECK
Service Mode
Indicate the version and check sum of the ROM.
5 5 1
START
5 5 8
START
Check the LCD indication.
Illuminate all dots to check if they are normal.
4-5. SERVICE MODE SETTING VALUES (Example of a printed out list)
SERVICE DATA LIST
SPECIAL SERVICE SETTING
Set Value
Code
5. TEST FUNCTIONS