|19 |
TROUBLESHOOTING GUIDE
KX-F680BX/KX-F2681BX
2. USER RECOVERABLE ERRORS
If the unit detects a problem, the following messages will appear in the display.
DISPLAY MESSAGE CAUSE AND REMEDY
CALL SERVICE
There is something wrong with the unit.
The back lid is open. Close it.
The handset and handset cradle have been removed when you connect the power
cord.
--- When you want to use the handset and handset cradle, install the handset cradle
correctly.
--- When you do not use the handset and handset cradle, set the handset switch to
NO HANDSET. Then, disconnect and connect the power cord again.
The document is not fed into the unit properly. Reinsert the document.
If the misfeeding occurs frequently, clean the document feeder rollers inside the unit.
If the problem remains, adjust the feeder pressure.
Memory (phone numbers, parameters, etc.) has been erased. Re-program.
A mechanical error occurred. Open the back lid and re-install the recording paper.
There is no room left in memory to record a message. Erase some or all of the
messages.
The receiving unit is busy or ran out of recording paper. Try again.
The TEL/FAX greeting message has not been recorded. Record a greeting message.
The unit ran out of recording paper. Install a new recording paper.
CHECK COVER
CHECK CRADLE
CHECK MEMORY
CHECK DOCUMENT
MECHA ERROR
MEMORY FULL
NO RESPONSE
NO TEL GREETING
OUT OF PAPER
POLLING ERROR
REDIAL TIME OUT
REMOVE DOCUMENT
TRANSMIT ERROR
UNIT OVERHEATED
The other fax machine does not provide the polling function. Check with the other
party.
The receiving unit is busy or ran out of recording paper. Try again.
The document is jammed. Remove the jammed document.
Attempted to transmit a document longer than 600 mm (23
5
/
8
"). Press the STOP button
and remove the document. Divide the document into two or more sheets and try again.
A transmission error occurred. Try again.
The unit is too hot. Let the unit cool down.