|44 |
KX-F680BX/KX-F2681BX
Inquire the receiver if the
caller's document is facsimiled
correctly.
Is the data facsimiled
correctly?
Ask the service section of the
receiver's FAX machine to con-
firm the machine condition.
Perform communication test us-
ing the LOOP simulator and
check the machine reception
condition.
Is FTT sent from the receiver?
Perform voice communication
with the NG caller.
Check if the line is not inter-
rupted by noises or in the cross
talk, If it is not, wait until the line
is satisfactory for correct com-
munication.
No response after post message is transmitted
three times.
RTN and PIN are received.
No response after FTT is transmitted.
: No problem on the machine hardware.
Modem test
(TEST CODE NO.554)
YES
YES
NO
6.1
3.1
6
5
4
3.2
NO
To Next Page
Loading...
