|47 |
TROUBLESHOOTING GUIDE
KX-F680BX/KX-F2681BX
Confirm if a mechanical trouble
occurred, e.g. transmission was
interrupted or document was out
of place, on the receiver side
(being polled).
DCN is received after transmission of NSC and DTC.
Was it a mechanical
error as mentioned above?
Ask the receiver to set the poll
mode again and perform polling.
Ask the service section of the
receiver/s FAX machine for ex-
amination.
Confirm if a mechanical trouble
occurred, e.g. the caller inter-
rupted the transmission.
Was it a mechanical
error as mentioned above?
Have the caller transmit the data
again.
Ask the service section of the
caller's FAX machine for exami-
nation.
Check the hardware of the pe-
ripherals of the modem.
300BPS error
Modem error
YES
YES
NO
NO
10
11
12
DCN is received after DIS transmission.
To Next Page
Loading...
