|49 |
TROUBLESHOOTING GUIDE
KX-F680BX/KX-F2681BX
Confirm if a mechanical trouble
occurred, e.g. transmission was
interrupted or document was out
of place, on the receiver side
(being polled).
Was it mechanical error as
mentioned above?
Ask the receiver to set the Poll
mode again and perform polling.
Perform communication test us-
ing the LOOP simulator and
check the machine reception
condition.
Is carrier cut?
Modem test
(TEST CODE NO.554)
Ask the service section of the
receiver's FAX machine for ex-
amination.
Carrier is cut when image signal is received.
Polling is not possible.
NO
YES
NO
6.1
16
YES
15
To Next Page
Loading...
