Panasonic KX-F680BX - Page 86

|92 |
KX-F680BX/KX-F2681BX
Code
Function
563
CCD position adjustment
value set
Set Value
Remarks
00 ‘30
–
00 ‘30 ~1 mm
Lets you select the correction
value for main scanning direc-
tion of the dislocated scanner.
571
570
Setting of the % break
Setting of number of times that
ITS is redialed
1, 2
00 ‘99
61%
14 times
1 : 61%
2 : 67%
00 ‘99
Sets the % break of the pulse
dial.
Effective Range
Default
572
573
Setting of ITS redial interval
580
001 ‘999
001 ‘999 sec
030 sec
Sets the interval of ITS redial.
15 times
01 ‘99
01 ‘99
Sets the number of times that
the REMOTE TURN ON BELL
sounds.
590
0 ‘99
00 ‘99
5 times
1:ON
2 : OFF
1, 2 ON
591
Setting of FAX redial interval
592
Designation of CNG sending
001 ‘999 sec
001 ‘999
045 sec
Sets the interval of FAX redial
during FAX communication.
1 : OFF
2 : ALL
3 : AUTO
1, 2, 3 ALL
593
Setting of interval between CED
and 300 bps signal.
1, 2, 3
75 msec
Sets the interval between the
CED signal and subsequent
300 bps signal.
Lets you select the CNG output
during FAX transmission.
ALL: CNG is output at phase A.
AUTO: CNG is output only when
the automatic dialing is per-
formed.
OFF: CNG is not output at phase
A.
594
Setting of overseas DIS detection
Sets the recognizing format of DIS
signal.
1: Detects the first DIS signal sent
from the receiver during FAX
transmission.
2: Ignores the first DIS signal sent
from the receiver during FAX
transmission.
1, 2
1 : Detects at the
1st time
2 : Detects at the
2nd time
Detects
at the
1st
time
595
Setting of the acceptable value of
reception error
001 ‘999
100
001 ‘999 ~number of times
596
Setting of transmit level
717
Transmit speed select
-15 ‘00
-15 ‘00 -10 dBm
Selects the FAX transmission
level.
(Increase the level when the
telephone line condition is poor.)
9600 BPS 1 ‘4
Sets the number of error ac-
ceptable lines when the FAX re-
constructs the received data.
718
Receive speed select
Adjusts the speed to start train-
ing during FAX reception.
9600 BPS 1 ‘4
Selects the number of times of re-
dial during FAX communication (not
including the first dialing).
1 : 9600 BPS
2 : 7200 BPS
3 : 4800 BPS
4 : 2400 BPS
1 : 9600 BPS
2 : 7200 BPS
3 : 4800 BPS
4 : 2400 BPS
1 : 75 msec
2 : 500 msec
3 : 1000 msec
Setting of number of times of FAX
redial
TAM continuous tone detect
Setting of number of times that
REMOTE TURN ON BELL
sounds.
Selects the number of times that
ITS is redialed (not including the
first dialing).
Adjusts the speed to start train-
ing during FAX transmission.