When the recording paper has jammed near the recording
paper exit:
2-1. Pull the tension plate forward (
), then remove the paper tray
cover (
).
2-2. Remove the recording paper ( ), then remove the drum and
toner unit (
) to allow the jammed paper ( ) to pull free from the
rear cabinet.
2-3. Lift both green levers ( ) forward until they stop.
2-4. Remove the jammed paper ( ) from the fuser unit by pulling
it upwards carefully, then install the drum and toner unit.
37
KX-FL612CX / KX-FL612CX-S
To Next Page
Loading...
