1.9. SERVICE PRECAUTIONS
1.9.1. PRECAUTIONS TO PREVENT DAMAGE FROM STATIC ELECTRICITY
Electrical charges accumulate on a person. For instance, clothes rubbing together can damage electric elements or change their
electrical characteristics. In order to prevent static electricity, touch a metallic part that is grounded to release the static electricity.
Never touch the electrical sections such as the power supply unit, etc.
1.10. FOR BEST PERFORMANCE
•
• •
• To extend the life of the drum unit, the unit should never be turned OFF immediately after printing. Leave the power turned ON
for a minimum of 30 minutes after printing.
•
• •
• In the printing process, heat is used to fuse toner onto the page. As a result, it is normal for the machine to produce an odor
during and shortly after printing. Be sure to use this unit in an area with proper ventilation.
•
• •
• Do not cover slots or openings on the unit. Inspect the air circulation vents regularly and remove any dust build-up with a
vacuum cleaner.
•
• •
• If the inside of the unit is dirty, clean it with a soft and dry cloth (especially the lower glass).
•
• •
• When replacing the toner cartridge or drum unit, do not allow dust, water, or liquids to come in contact with the drum. This may
affect print quality.
•
• •
• Store unused paper in the original packaging, in a cool and dry place. Not doing so may affect print quality.
•
• •
• Do not place the unit in an area where the paper tray may be obstructed (i.e., by a wall,etc.).
•
• •
• Keep the air circulation vents away from walls etc.more than 50 mm (1 31 / ") to let the unit cool down.
9
KX-FL612CX / KX-FL612CX-S
To Next Page
Loading...
