2. Preparation
13
2 Preparat ionConnections and Setup
2.1 Connections
Caution:
L When you operate this product, the power outlet
should be near the product and easily
accessible.
L Be sure to use the telephone line cord included in
this unit.
L Do not extend the telephone line cord.
Note:
L If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
L If you use the unit with a computer and your internet
provider instructs you to install a filter (5), please
connect it as follows.
2.2 Dialling mode
If you cannot dial (page 16, 20), change this setting
depending on your telephone line service.
1 {MENU} i {#}{1}{3}
DIAL MODE
=TONE [±]
2 Press {1} or {2} to select the desired setting.
{1} “PULSE”: For rotary/pulse dial service.
{2} “TONE” (default): For tone dial service.
3 {SET}
4 Press {MENU} to exit.
1 Telephone line cord
L Connect to a single telephone line jack.
2 Power cord
L Connect to a power outlet (220–240 V, 50/60
Hz).
3 [EXT] jack
L You can connect an answering machine or a
telephone. Remove the stopper if attached.
4 Answering machine (not included)
1
3
4
2
5
{SET}{MENU}
FP701FX-PFQX2792ZA-en.book Page 13 Friday, July 13, 2007 3:34 PM
To Next Page
Loading...
Need help?
General
