6. Programmable Features
30
6.2 Basic features
Feature Feature code Selection
Setting the date and
time
{#}{0}{1} Enter the date and time using the dial keypad. See page 14 for
details.
Setting your logo {#}{0}{2} Enter your logo using the dial keypad. See page 15 for details.
Setting your fax
number
{#}{0}{3} Enter your fax number using the dial keypad. See page 15 for
details.
Printing a sending
report
{#}{0}{4}{0} “OFF”: Sending reports will not be printed.
{1} “ON”: A sending report will be printed after every fax
transmission.
{2} “ERROR” (default): A sending report will be printed only when
a fax transmission fails.
Changing the ring
count in FAX ONLY
mode
{#}{0}{6}{1} “1”
{2} “2” (default)
{3} “3”
{4} “4”
{5} “5”
{6} “6”
{7} “7”
{8} “8”
{9} “9”
Setting the dialling
mode
{#}{1}{3} If you cannot make calls, change this setting according to your
telephone line service.
{1} “PULSE”: For rotary/pulse dial service.
{2} “TONE” (default): For tone dial service.
Setting the ringer tone {#}{1}{7}{1} “TONE 1” (default)
{2} “TONE 2”
{3} “TONE 3”
FP701FX-PFQX2792ZA-en.book Page 30 Friday, July 13, 2007 3:34 PM
To Next Page
Loading...
Need help?
General
