Panasonic KX-FT21BX

KX-FT21LA
- 136 -
Bit No. DIS/DTC
7
10
8
11, 12
(0, 0)
(0, 1)
(1, 0)
(1, 1)
13
14
15
Reserved for future T.3 operation features.
Reserved for future T.3 operation features.
Transmitter - T.4 operation
Receiver - T.4 operation
Data signaling rate
V.27 ter fallback mode
V.27 ter
V.29
V.27 ter and V.29
Reserved for the new modulation system.
Reserved for the new modulation system.
Vertical resolution = 7.7 line/mm
Two-dimensional coding capability
Recording width capabilities
1728 picture elements along a scan line
length of 215 mm ±} 1%
1728 picture elements along a scan line
length of 215 mm ±} 1% and
2048 picture elements along a scan line
length of 255 mm ±} 1% and
2432 picture elements along a scan line
length of 303 mm ±} 1%
1728 picture elements along a scan line
length of 215 mm ±} 1% and
2048 picture elements along a scan line
length of 255 mm ±} 1%
Invalid (See Note 7.)
Maximum recording length capability
A4 (297 mm)
Unlimited
A4 (297 mm) and B4 (364 mm)
Invalid
Receiver - T.4 operation
DCS
Data signaling rate
2400 bit/s V.27 ter
4800 bit/s V.27 ter
9600 bit/s V.29
7200 bit/s V.29
Vertical resolution = 7.7 line/mm
Two-dimensional coding
Recording width
1728 picture elements along a scan line
length of 215 mm ±} 1%
2432 picture elements along a scan line
length of 303 mm ±} 1%
2048 picture elements along scan line
length of 255 mm ±} 1%
Invalid
Maximum recording length
A4 (297 mm)
Unlimited
B4 (364 mm)
Invalid
16
17, 18
(0, 0)
(0, 1)
(1, 0)
(1, 1)
19, 20
(0, 0)
(0, 1)
(1, 0)
(1, 1)
9
Standard setting
Minimum scan line time
20 ms
40 ms
10ms
5ms
0ms
Minimum scan line time capability of the receiver
20 ms at 3.851/mm: T7.7=T3.85
40 ms at 3.851/mm: T7.7=T3.85
10 ms at 3.851/mm: T7.7=T3.85
5 ms at 3.851/mm: T7.7=T3.85
10 ms at 3.851/mm: T7.7=1/2 T3.85
20 ms at 3.851/mm: T7.7=1/2 T3.85
40 ms at 3.851/mm: T7.7=1/2 T3.85
0 ms at 3.851/mm: T7.7=T3.85
Bit No.
21, 22, 23
(0, 0, 0)
(0, 0, 1)
(0, 1, 0)
(1, 0, 0)
(0, 1, 1)
(1, 1, 0)
(1, 0, 1)
(1, 1, 1)
DCS
DIS/DTC
Function:
Notifies the capacity of the receiving machine ob-
tained at DIS and announces the transmission
mode of the sender. The added data signals are
as follows.
Signal.....DCS (Digital Command Signal)
Identification Signal Format.....X1000001
(Example)