Panasonic KX-FT21BX - Page 72

KX-FT21LA
- 46 -
(2)
RESULT
ERROR-NOT YOUR UNIT
(ERROR OTRA UNIDAD)
ERROR-NOT YOUR UNIT
(ERROR OTRA UNIDAD)
COMMUNICATION ERROR
(ERROR DE COMUNICACION)
COMMUNICATION ERROR
(ERROR DE COMUNICACION)
ERROR-NOT YOUR UNIT
(ERROR OTRA UNIDAD)
COMMUNICATION ERROR
(ERROR DE COMUNICACION)
COMMUNICATION ERROR
(ERROR DE COMUNICACION)
ERROR-NOT YOUR UNIT
(ERROR OTRA UNIDAD)
COMMUNICATION ERROR
(ERROR DE COMUNICACION)
COMMUNICATION ERROR
(ERROR DE COMUNICACION)
(3)
MODE
TRANS
LECUP
TRANS
LECUP
TRANS
TRANS
LECUP
LECUP
LECUP
TRANS&LECUP
(1)
CODE
53
54
57
58
59
64
68
70
72
FF
SYMPTOM
DCN is received after transmission of NSC and DTC.
DCN is received after DIS transmission.
300BPS error
DCN is received after FTT transmission.
DCN responds to a post message.
Polling is not possible.
No response at the other party after MCF or CFR is transmitted.
DCN is received after CFR transmission.
The carrier is cut when the image signal is received.
Modem error.
9
10
11
12
13
14
15
13
13
12
Counter-
measure
SND=TRANSMISSION RCV=RECEPTION
*Most fax communication problems can be resolved by the following steps.
1) Change the transmit level. (Service code: 596, refer to page 86.)
2) Change the TX speed/RX speed. (Service code: 717/718, refer to page 86.)
If the problem remains, see the next page.