3. Preparation
12
5 Enter the current hour/minute by selecting 2 digits for
each. Press {*} repeatedly to select “AM”, “PM”, or
24-hour time entry.
L When neither “AM” nor “PM” is displayed, 24-
hour time entry is selected.
Example: 15:20 (24-hour time entry)
Press {1}{5} {2}{0}.
D:|10/M:08/Y:06
TIME: 15:20
6 Press {SET}.
L The next feature will be displayed.
7 Press {MENU}.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
3.6 Your logo
Your logo will be printed on the top of each page sent
from your unit.
The logo can be your name or the name of your
company.
1 Press {MENU}.
SYSTEM SETUP
PRESS [()]
2 Press {<} or { >} repeatedly to display the following.
YOUR LOGO
PRESS SET
3 Press {SET}.
L The cursor (|) will appear on the display.
LOGO=|
4 Enter your logo, up to 30 characters. See the
following character table for details.
5 Press {SET}.
L The next feature will be displayed.
6 Press {MENU}.
To select characters with the dial keypad
Note:
L To enter another character that is located on the
same dial key, press {>} to move the cursor to the
next space.
To enter your logo
Example: “BILL”
1. Press {2} 2 times.
LOGO=|B
2. Press {4} 3 times.
LOGO=B|I
3. Press {5} 3 times.
LOGO=BI|L
{STOP}
{A}{B}{<}{>}
{SET}
{MENU}
{R}
Keypad Characters
{1} Space # & ’ ( )
@ ,–./1
{2} ABC2
abc2
{3} DEF3
def 3
{4} GHI 4
ghi 4
{5} JKL5
jkl5
{6} MNO6
mn o 6
{7} PQRS7
pqr s7
{8} TUV8
tuv8
{9} WX Y Z 9
wxyz9
{0} Space 0
{*} To change uppercase or lowercase
letter.
{R} To enter a hyphen.
{STOP} To delete a digit.
FT932-938FX_PFQX2588ZA-en.book Page 12 Thursday, June 15, 2006 8:30 AM
To Next Page
Loading...
