7. Answering Machine (KX-FT938 only)
29
Example:
Press {PLAYBACK}.
L Only new messages will be played.
L Adjust the speaker volume using {A} or {B}.
L After playing back all of the new messages;
–the {AUTO ANSWER} indicator will stop flashing
but will remain lit up when the auto answer setting
is turned ON.
– the total number of recorded messages will stop
flashing and remain displayed.
If you press {PLAYBACK} at this time, all
recorded messages will be played.
Note:
L The total recording time of all messages (greeting,
incoming and recorded conversation) is about 18
minutes. A maximum of 50 messages can be
recorded. If messages are recorded in noisy
environment, the actual recording time may be less.
To repeat a message
Press {<} while listening to the message.
L If you press {<} within 5 seconds of the beginning of
the message, the previous message will be played.
L To play back a specific message, press {<} or {>}
and search for the message you want to listen to.
To skip a message
Press {>} to play the next message.
To stop playback
Press {STOP}.
7.3.1 Erasing recorded messages
To erase a specific message
Press {ERASE} while listening to the message you want
to erase.
To erase all messages
1 Press {ERASE} while the unit is idle.
2 Press {SET}.
L To cancel erasing, press {STOP}.
3 Press {SET}.
Remote Operation
02
{PLAYBACK}
{A}{B}{<}{>}
{ERASE}
{STOP}
FT932-938FX_PFQX2588ZA-en.book Page 29 Thursday, June 15, 2006 8:30 AM
To Next Page
Loading...
