8. Programmable Features
32
8 Programma ble FeaturesFeatures Summ ary
8.1 Programming
8.1.1 Programming basic features
1
Press {MENU}.
2 Select the feature you wish to program.
Press {<} or {>} repeatedly to display the desired
feature.
L The current setting of the feature will be
displayed.
3 Press {A} or {B} repeatedly to display the desired
setting.
L This step may be slightly different depending on
the feature.
4 Press {SET}.
L The setting you selected is set, and the next
feature will be displayed.
5 To exit programming, press {MENU}.
8.1.2 Programming advanced features
1
Press {MENU}.
2 Press {<} or {>} repeatedly to display “ADVANCE
SETTINGS”.
3 Press {SET}.
4 Select the feature you wish to program.
Press {<} or {>} repeatedly to display the desired
feature.
L The current setting of the feature will be
displayed.
5 Press {A} or {B} repeatedly to display the desired
setting.
L This step may be slightly different depending on
the feature.
6 Press {SET}.
L The setting you selected is set, and the next
feature will be displayed.
7 To exit programming, press {MENU}.
To program by entering the program code number
directly
You can select a feature by directly entering its program
code (# and a 2-digit number) instead of using {<} or
{>}.
1. Press {MENU}.
2. Press {#} and the 2-digit code (page 32 to page 35).
3. Press {A} or {B} repeatedly to display the desired
setting.
L This step may be slightly different depending on
the feature.
4. Press {SET}.
5. To exit programming, press {MENU}.
To cancel programming
Press {MENU} to exit.
8.2 Basic features
Code #01: Setting the date and time
SET DATE & TIME
PRESS SET
See page 11 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 12 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 13 for details.
Code #04: Printing a sending report
SENDING REPORT
=ERROR [±]
To print a sending report for fax transmission results
(page 20).
“ERROR” (default): A sending report will be printed only
when fax transmission fails.
“ON”: A sending report will be printed after every
transmission.
“OFF”: The sending reports will not be printed.
Code #06: Changing the ring setting in FAX ONLY
mode (KX-FT932 only)
FAX RING COUNT
RINGS=2 [±]
To change the number of rings before the unit answers a
call in FAX ONLY mode.
You can select “1”, “2” (default), “3”, “4”, “5”, “6”,
“7”, “8” or “9”.
{A}{B}{<}{>}
{MENU}
{SET}
FT932-938FX_PFQX2588ZA-en.book Page 32 Thursday, June 15, 2006 8:30 AM
To Next Page
Loading...
