EasyManua.ls Logo

Panasonic KX-FT932FX

Panasonic KX-FT932FX
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. Telephone
17
The display will show the number of new calls in standby
mode.
Example: 10 NEW CALLS
10:59
1 Press {CALLER ID}.
2 Press {B} to search from the recently received caller
information.
L If you press {A}, the display order will be
reversed.
3 Lift the handset or press {MONITOR} (KX-
FT932)/{SP-PHONE} (KX-FT938) to return the call.
L The unit will start dialling automatically.
L To send a fax, insert the document FACE DOWN
and press {FAX/START}.
To change the way caller information is displayed
Press {CALLER ID} repeatedly after the caller
information is displayed.
Example: SAM LEE
20 Jul. 11:20 ,
b
1345678901
20 Jul. 11:20 ,
L A Q on the display means the item has already been
viewed or answered.
Display while viewing
L When the unit could not receive a name, the display
will show NO NAME RCVD.
L When no calls have been received, the display will
show MEMORY EMPTY.
To stop viewing
Press {STOP}.
4.6 Editing a caller’s telephone
number before calling back
1 Press {CALLER ID}.
2 Press {A} or {B} repeatedly to display the desired
item.
3 Press {CALLER ID} to display the telephone
number.
4 To insert a number in front of the telephone number,
press the desired dial key ({0} to {9}).
L You can also initiate the editing mode by
pressing {*}.
5 Lift the handset or press {MONITOR} (KX-
FT932)/{SP-PHONE} (KX-FT938) to call back the
edited number.
L The unit will start dialling automatically.
L To send a fax, insert the document FACE DOWN
and press {FAX/START}.
Note:
L The edited telephone number will not be saved as
caller information. To store it into the phonebook, see
page 18.
To correct a mistake
1. Press {<} or {>} to move the cursor to the incorrect
number.
2. Press {STOP} to delete the number.
3. Enter the correct number.
To delete a number
Press { <} or {>} to move the cursor to the number you
want to delete and press {STOP}.
To insert a number
1. Press {<} or {>} to move the cursor to the position to
the right of where you want to insert the number.
2. Enter the number.
{STOP}
{A}{B}
{CALLER ID}
{FAX/START}
{MONITOR} (KX-FT932)
{
SP-PHONE
}
(
KX-FT938
)
{STOP}
{CALLER ID}
{FAX/START}
{A}{B}{<}{>}
{MONITOR} (KX-FT932)
{SP-PHONE} (KX-FT938)
FT932-938FX_PFQX2588ZA-en.book Page 17 Thursday, June 15, 2006 8:30 AM

Table of Contents

Related product manuals