Panasonic KX-FT932FX

8. Programmable Features
36
{#}{0}{4} Sending report
– {1}: “ON”
– {2}: “OFF”
– {3}: “ERROR” (default)
{#}{0}{6} FAX ring count (KX-FT932 only)
– {1}: “1”
– {2}: “2” (default)
– {3}: “3”
– {4}: “4”
– {5}: “5”
– {6}: “6”
– {7}: “7”
– {8}: “8”
– {9}: “9”
{#}{0}{6} TAM ring count (KX-FT938 only)
– {0}: “AUTO”
– {2}: “2” (default)
– {3}: “3”
– {4}: “4”
– {5}: “5”
– {6}: “6”
– {7}: “7”
{#}{0}{6} FAX ring count (KX-FT938 only)
– {1}: “1”
– {2}: “2” (default)
– {3}: “3”
– {4}: “4”
{#}{1}{0} Message recording time (KX-FT938 only)
– {1}: “1 MIN”
– {2}: “GREET ONLY”
– {3}: “NO LIMIT” (default)
{#}{1}{1} Remote operation ID (KX-FT938 only)
L Enter a 3-digit number to activate the remote
operation feature. To deactivate the remote operation
feature, press {*}.
{#}{1}{3} Dialling mode
– {1}: “PULSE”
– {2}: “TONE” (default)
{#}{1}{7} External ringer type
– {1}: “RINGER 1” (default)
– {2}: “RINGER 2”
– {3}: “RINGER 3”
{#}{2}{2} Automatic journal report
– {1}: “ON” (default)
– {2}: “OFF”
{#}{2}{3} Overseas mode
– {1}: “NEXT FAX”
– {2}: “OFF”
– {3}: “ERROR” (default)
{#}{2}{5} Delayed transmission
– {1}: “ON”
– {2}: “OFF” (default)
L If you select “ON”, next enter the fax number and
transmission time using the dial keypad (see feature
#25 on page 33 for details).
{#}{2}{6} Automatic Caller ID list
– {1}: “ON”
– {2}: “OFF” (default)
{#}{3}{6} Receiving reduction
– {1}: “ON” (default)
– {2}: “OFF”
{#}{3}{9} Display contrast
– {1}: “NORMAL” (default)
– {2}: “DARKER”
{#}{4}{1} Fax activation code
– {1}: “ON” (default)
– {2}: “OFF”
L If you select “ON”, next enter your 2 to 4 digit code
using {0}–{9}, {*} and {#}.
{#}{4}{4} Memory reception alert
– {1}: “ON” (default)
– {2}: “OFF”
{#}{4}{6} Friendly reception
– {1}: “ON” (default)
– {2}: “OFF”
{#}{5}{4} Greeting recording time (KX-FT938 only)
– {1}: “16s” (default)
– {2}: “60s”
{#}{5}{8} Scan contrast
– {1}: “NORMAL” (default)
– {2}: “LIGHT”
– {3}: “DARKER”
{#}{5}{9} Print contrast
– {1}: “NORMAL” (default)
– {2}: “DARKER”
{#}{6}{7} Incoming message monitor (KX-FT938
only)
– {1}: “ON” (default)
– {2}: “OFF”
{#}{7}{0} Pager call (KX-FT938 only)
– {1}: “ON”
– {2}: “OFF” (default)
L See page 31 for details.
{#}{7}{3} Manual receive mode
– {1}: “TEL” (default)
FT932-938FX_PFQX2588ZA-en.book Page 36 Thursday, June 15, 2006 8:30 AM