9.1.6 LAN features (KX-MB2090 only)
Feature/Code Selection
LAN setting with a DHCP
server
MBNM5NM0NM0N
M0N “DISABLED”: Deactivates this feature.
M1N “ENABLED” (default): The following will be allocated automatically using a
DHCP (Dynamic Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gateway
Setting the IP address for the
LAN connection
MBNM5NM0NM1N
This feature is available when feature #500 is deactivated.
1. MMENUN A MBNM5NM0NM1N A MSETN
2. Enter the IP address of the unit on the LAN using the dial keypad. A
MSETN A MMENUN
Setting the Subnet mask for
the LAN connection
MBNM5NM0NM2N
This feature is available when feature #500 is deactivated.
1. MMENUN A MBNM5NM0NM2N A MSETN
2. Enter the subnet mask of the network on the LAN using the dial keypad.
A MSETN A MMENUN
Setting the default gateway
for the LAN connection
MBNM5NM0NM3N
This feature is available when feature #500 is deactivated.
1. MMENUN A MBNM5NM0NM3N A MSETN
2. Enter the default gateway of the network on the LAN using the dial keypad.
A MSETN A MMENUN
Setting the primary DNS
server for the LAN
connection
MBNM5NM0NM4N
This feature is available when feature #500 is deactivated.
1. MMENUN A MBNM5NM0NM4N A MSETN
2. Enter the primary DNS server of the network on the LAN using the dial
keypad. A MSETN A MMENUN
Setting the secondary DNS
server for the LAN
connection
MBNM5NM0NM5N
This feature is available when feature #500 is deactivated.
1. MMENUN A MBNM5NM0NM5N A MSETN
2. Enter the secondary DNS server of the network on the LAN using the dial
keypad. A MSETN A MMENUN
Setting the machine name
MBNM5NM0NM7N
1. MMENUN A MBNM5NM0NM7N A MSETN
2. Enter the name of the unit to recognize on the LAN, up to 15 characters,
using the English alphabet and numbers (see page 76 for character entry).
R The first and last letter must be an English alphabet or numbers.
R Hyphen can also be entered using M1N.
3. MSETN A MMENUN
Note:
R In order to recognize the unit on the LAN, the default name of the unit is
assigned automatically. If you change the name, assign a unique name to
avoid overlapping.
Displaying the MAC address
of the unit
MBNM5NM0NM8N
1. MMENUN A MBNM5NM0NM8N A MSETN
2. The MAC address of the unit will be displayed. A MMENUN
Setting the Bonjour feature
MBNM5NM1NM3N
M0N “DISABLED”: Deactivates this feature.
M1N “ENABLED” (default): The Bonjour feature is enabled.
Viewing the network status
MBNM5NM2NM6N
See page 88 for details.
IP filtering for the LAN
connection
MBNM5NM3NM2N
M0N “DISABLED” (default): Deactivates this feature.
M1N “ENABLED”: The unit will deny/approve access from the pre-programmed
IP patterns. You can program whether to deny or approve IP addresses. Up to
4 patterns each for IPv4 and IPv6 can be programmed through the web browser
interface (page 74).
69
9. Programmable Features
To Next Page
Loading...
