Panasonic KX-NCP1000 - Page 39

KX-NT265 (Software version 2.00 or later only)
PBX IP
Address
To enter the IP address of the IPCMPR card (PBX IP Address)
The IP-PT will reboot
and can then be
registered to the PBX.
To end programming
Press PROGRAM
while "Searching" is displayed.
To start programming
Supply power to the IP-PT.
PROG.
Press HOLD to return
to the Menu screen.
HOLD
Press VOLUME
to select "PBX".
VOL
Press SP-PHONE
twice.
Press SP-PHONE.
Press STORE.
Getting Started 39
4.3.1 Assigning the IP Addressing Information