Panasonic KX-NCP1000 - Page 47

The IP-PT will reboot
and can then be
registered to the PBX.
To end programming
Press HOLD twice to return
to the Menu screen.
Press STORE.
Continued from previous page
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range:
"0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
Note
To confirm the connection to the secondary PBX after programming, (1) turn the IP-PT’s power off,
and (2) hold the STORE button and 2 key while turning the power on.
Getting Started 47
4.3.1 Assigning the IP Addressing Information