For KX-HGT100 SIP Telephones
1. Using a DHCP server to automate the assignment of IP addressing information
The DHCP
server automatically assigns the IP address of the KX-HGT100, the subnet mask address, and
the default gateway address to the KX-HGT100.
The PBX IP address can be assigned to the KX-HGT100 through Web Programming. For details, refer
to "4.3.2 Registering IP Telephones".
Follow the procedure below to assign IP addressing information automatically.
To set the IP address of the KX-HGT100
To start programming
Supply power to the KX-HGT100.
Press PROGRAM.
Select "Set network". Press OK. Select "DHCP". Press OK.
To end programming
Press
PROGRAM
.
C. Tone
2. Not using a DHCP server when assigning IP addressing information
The IP address of the KX-HGT100, the subnet mask address, and the default gateway address must be
assigned manually.
The PBX IP address can be assigned to the KX-HGT100 through Web Programming. For details, refer
to "4.3.2 Registering IP Telephones
".
Getting Started 49
4.3.1 Assigning the IP Addressing Information
To Next Page
Loading...
