3/21/2013 4
Rev1
Basic V-SIPGW16 Settings for OnSIP Trunks
1-Install the PBX Maintenance console into your PC
The maintenance console should be available to certified dealers; Dealers can get the
latest version of the UPCMC from www.psnareseller.com (UPCMC version 7.2.1.0
or higher)
2- Connect to the PBX
o Start the UPCMC
o Click Connect and choose the method of connection using either LAN , RS-
232, or Modem to Connect to your PBX for interactive configuration
** We will be using the LAN method throughout this guide**
Provide the IP address of the MPR card and the password of the INSTALLER Level
To Next Page
Loading...
