8.
a. Under Do not use proxy server for addresses
beginning with:,
type the IP address of the LAN port
of the card.
b. Click OK.
Your PC is now ready for programming the
KX-HGT100 through an IP network.
Programming the KX-HGT100
1. Start Internet Explorer from the Start menu.
2.
a. Enter the IP address of the KX-HGT100 in the
address box.
b. Press the Enter key.
3. The log-in screen will appear.
a. In the User name
box,
type the user name (default:
KX-HGT100).
b. In the Password box, type the password (default:
kx-hgt100).
c. Click OK.
4. The top page will appear.
a. Click Basic Setting.
b. In the Telephone Number and SIP ID boxes, type
the extension number.
c. In the SIP Password box, type the password.
d. In
the Proxy
Address, Registrar Address, and SIP
Domain boxes, type the IP address of the
IPCMPR card.
e. Click Save.
f. Click Return to top page.
5.
a. Click Restart.
b. Click Restart now for changes to take effect. The
KX-HGT100 will be restarted.
If the authentication information of the KX-HGT100
and the PBX match, the registration is successful.
58 Getting Started
4.3.2 Registering IP Telephones
To Next Page
Loading...
