Panasonic KX-NCP500 User Manual

1.4.3 Talking to Two Parties Alternately (Call Splitting)
When
talking to one party while the other party is on hold, you can swap the calls back and forth (alternately).
To alternate between the parties leaving one party on hold temporarily
PT/PS
During a conversation
Press TRANSFER.
Talk to the
other party.
Talk to the
original party.
TRANSFER
Press DSS or dial the other
party's extension number.
Press TRANSFER.
extension no.
OR
(DSS)
OR
TRANSFER
C.Tone
The other party will be on hold.
SLT
During a conversation
Talk to the
other party.
Talk to the
original party.
Dial the other party's
extension number.
Press Recall/
hookswitch.
extension no.
OR
Press Recall/
hookswitch.
OR
C.Tone
The other party will be on hold.
To leave the conversation and then let the two parties talk
PT/PS
Press DSS or dial the other
party's extension number.
Talk to the
other party.
During a conversation
Press TRANSFER.
extension no.
OR
(DSS)
OR
TRANSFER
Press TRANSFER.
OR
TRANSFER
C.Tone
On-hook.
70 User Manual
1.4.3 Talking to Two Parties Alternately (Call Splitting)

Panasonic KX-NCP500 Specifications

General

VoIP Support	Yes
Operating System	Proprietary
Type	Hybrid IP-PBX
VoIP Codecs	G.711, G.729A
Protocols	SIP, H.323
Operating Temperature	0°C to 40°C
Analog Extensions	Yes
IP Extensions	Yes
Power Supply	AC 100-240 V, 50/60 Hz
SIP Trunks	Yes
Wireless (DECT) Extensions	Yes, with optional module
Weight	4.0 kg
Humidity	20% to 80% (non-condensing)