Installation Manual References
5.11 Automatic Configuration of Mailboxes
PC Programming Manual References
7.5.3 Utility—Report—UM View Reports
Section 20 UM Configuration—[1] Mailbox Settings
Feature Manual References
3.1.2.1 Automatic Configuration of Mailboxes
Operating Manual References
Subscriber Operation
1.8.2 Logging in to and Configuring Your Mailbox
Manager Operation
2.2.1 System Manager Features— Setting Up Mailboxes
3.2.2.18 Mailbox Capacity Warning
Description
Allows the Unified Messaging system to alert subscribers when recording time for their mailboxes is running
low. The warning announcement will be heard at the beginning of Subscriber’s Service.
Conditions
• If the setting is longer than the Mailbox Capacity Maximum Message Time, this feature is not available.
PC Programming Manual References
21.1 UM Configuration—[2] Class of Service—Mailbox
→
Mailbox Capacity Warning (Selection)
→ Mailbox Capacity Maximum Message Time (Limited) (min)
3.2.2.19 Manager Service Switching
Description
Allows a subscriber to access the System Manager’s mailbox and Message Manager’s mailbox. Subscribers
that have this feature enabled through Class of Service (COS) programming can switch mailboxes simply by
pressing [#] twice from the subscriber service menu, in the following order:
Subscriber service Message Manager service System Manager service
364 Feature Manual
3.2.2 Subscriber Features
To Next Page
Loading...
Need help?
General