Why can't I originate an outside call, transfer a call, or start a conference on my Panasonic KX-NS1000?
If you're unable to originate an outside call, transfer a call, or start a conference on your Panasonic PBX, it's likely because the corresponding flexible button does not exist on the PT. To resolve this, program the flexible button.
What does ERR 2002-0000 POOR LAN CONNECTION mean on Panasonic KX-NS1000 PBX?
If your Panasonic PBX displays the error 'ERR 2002-0000 POOR LAN CONNECTION' and resets, it could be due to a transmission error. Check with your network administrator to see if there's a problem with the LAN. If the error appears frequently, consider repairing or replacing the IP-PT.
What to do if my Panasonic KX-NS1000 phone does not have a feature button?
If your Panasonic PBX proprietary telephone does not have a feature button, it may be because some models do not include one. In this case, you can change a flexible button to the desired button or enter the specified feature number instead of using the feature button.
How do I fix noise on external paging with my Panasonic PBX?
To eliminate noise on external paging with your Panasonic PBX: Use a shielded cable as the connection wire between the PBX and amplifier. A short shielded cable is recommended.
What does ERR 3100-0000 BLUETOOTH ERROR mean on Panasonic KX-NS1000?
If your Panasonic PBX displays the error 'ERR 3100-0000 BLUETOOTH ERROR' and resets the Bluetooth wireless headset, it indicates a Bluetooth hardware error. Repair or replace the Bluetooth wireless headset.
Why can't I set the IP address, subnet mask address, and PBX IP address to the IP-PT on my Panasonic KX-NS1000 PBX?
If you're unable to set the IP address, subnet mask address, and PBX IP address to the IP-PT on your Panasonic PBX, it's likely because you are setting an unusable value. Ensure you set an IP address within the valid range. For the IP address of the IP-PT/PBX, use a value between "1.0.0.0" and "223.255.255.255". For the subnet mask address, use a value between "0–255.0–255.0–255.0–255", excluding "0.0.0.0" and "255.255.255.255".
Why is my Panasonic PBX IP-PT not ringing?
If your Panasonic PBX IP-PT is not ringing, check if the ringer volume is turned off. If so, turn the ringer volume on.
Why I cannot use the secondary Ethernet port on my Panasonic KX-NS1000 PBX?
If you are using a KX-NT500 series telephone on your Panasonic PBX system and cannot use the secondary Ethernet port, check whether ECO mode is enabled. If it is enabled, ask your dealer to disable ECO mode. For other types of IP-PTs, contact your dealer.
How to fix parallelled single line Panasonic Telephones that do not ring?
If the parallelled single line telephones do not ring, the 'No ring' setting may be selected. Change the setting to ring.
What to do if I cannot register the ID of the Bluetooth headset on Panasonic Telephone?
If you cannot register, de-register, or confirm the ID of the Bluetooth headset on your Panasonic Telephone, make sure that the module is properly installed in the IP-PT/DPT.
General| Type | Hybrid IP-PBX |
|---|---|
| Max Concurrent Calls | 256 |
| VoIP Protocols | SIP, H.323 |
| Power Supply | AC 100-240V, 50/60Hz |
| Maximum Extensions | 1, 000 |
| IP Extensions | 1000 |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10 to 90% (non-condensing) |
| Max Users | 1000 |
To Next Page