Note
• The
server connection must be active to make changes to most CA Web Manager settings. If a server
connection is not active, click
to start it before logging in.
• Depending
how you access CA Web Manager, on the login screen you may need to specify which CA
Server (1 through 4, as in the server selection window) to log in to.
Web Browser Security Settings
Depending on your Web browser’s security settings, you may have to change settings to access CA Web
Manager. Each browser’s settings differ. The example below is for Windows Internet Explorer 8.
1. From the Tools menu, select Internet Options.
2. Click the Security tab.
3. Select Trusted Sites and then click the Sites button.
4. In Add this website to the zone, enter the CA Server’s IP address and port number for CA Web
Manager using the following format:
http://[IP address of the computer running CA Server]:[Web manager port number specified in
CA
Server setup]
For example, if the IP address of the computer running CA Server is [10.155.0.1] and the specified Web
manager port number is [8080], the address entered would be the following:
http://10.155.0.1:8080
After the address is entered, click Add.
Quick Reference Guide 21
4.2 Starting CA Web Manager
To Next Page
Loading...
