units. When CA Server
is connected to the Master unit, all CA Client users in the One-look network can log in
to the CA Server. In this way, the One-look network is considered a single entity that interacts with CA
Server.
Login Capabilities
When CA Server is used, the maximum number of simultaneous CA Client users is increased. The following
table shows the maximum number of users that can simultaneously use each CA Client login mode.
CA Client Login Mode
No. of Users
PBX Only
(Up to 240 total users)
No. of Users
with CA Server
(Up to 1022 total users)
Basic-Express
240 1022
Pro
Operator Console 128
128
Supervisor 4
Note
A One-look PBX network has the same maximum number of simultaneous
CA Client users as a "PBX
only" configuration. CA Server is required to increase the maximum number of users within the One-look
network.
Network Features
CA Client users can connect to CA Servers connected to other PBXs. Once connected, CA Client users can
view the presence of contacts on the other PBX in real-time, and make or receive calls with them. CA Client
users can also transfer calls or initiate a chat. A network activation key is required to use these network features.
Example network with multiple PBXs
IP Network
CA Client
Pro/Operator/Supervisor Users
with Network Activation Keys
PBX 1
CA Server
PBX 2
CA Client users
and extensions
CA Client users
and extensions
CA Client users
and extensions
PBX 3
KX-NS1000
Master Unit
(One-look network)
KX-NS1000
Slave Units
CA Server
CA Server
View presences and
contact lists of users on
other networked PBXs
To Next Page
Loading...
