Panasonic KX-NS300 - Page 64

Dial
extension number.
On-hook.
Talk.
During a conversation
SLT
Press Recall/
hookswitch.
extension no.
OR
C.Tone
This step can be omitted.
Dial extension number. On-hook.Talk.
During a conversation
SIP Extn./S-PS
extension no.
KX-UT series and S-PS:
Press TRANSFER.
Other than KX-UT series and S-PS:
Press HOLD.
*
C.Tone
This step can be omitted
(KX-UT series and S-PS only).
HOLD
OR
XFER
KX-UT series
and S-PS only.
• * For SIP phone users, instead of going on-hook, if you press the TRANSFER button
(KX-UT series [except KX-UT670]), Transfer Cancel button (KX-UT670) once, or the HOLD
button (non-KX-UT series) once or twice (depending on the telephone being used), you can
return to the held call. The call with the transferred party will be disconnected.
• For KX-UT series SIP phone and S-PS users, if you go on-hook while a call to be transferred
is still on hold, you will hear an alarm (Hold Recall) immediately.
For other types of telephone users, if the call is not transferred within a specified time, you
will hear an alarm (Hold Recall).
• For the transfer operation using an SDN button, refer to "1.5.1 Primary Directory Number
(PDN)/Secondary Directory Number (SDN) Extension".
64 User Manual
1.4.1 Transferring a Call (Call Transfer)