Panasonic KX-NS300 - Page 7

To transfer to an outside party using the PBX service
SIP Extn./S-PS
On-hook.Talk.Seize outside line.
During a conversation
Dial outside phone
number.
outside line
outside
phone no.
*
KX-UT series and S-PS:
Press TRANSFER.
Other than KX-UT series and S-PS:
Press HOLD.
This step can be omitted
(KX-UT series and S-PS only).
HOLD
OR
XFER
For KX-UT series:
Press ENTER.
OR
For S-PS:
Press CALL.
C.Tone
KX-UT series
and S-PS only.
To establish a conference call
Press CONFERENCE. Press CONFERENCE.Dial desired phone
number.
Seize an outside line before
dialling an outside phone number.
KX-UT series/S-PS
Talk with multiple
parties.
During a conversation
desired
phone no.
Talk to the
new party.
C.Tone
C.Tone
For KX-UT series:
Press ENTER.
OR
For S-PS:
Press CALL.
For KX-UT670:
Press Conference Start.
To set/cancel Call Forwarding
PT/SLT/PS/SIP Extn./S-PS
Enter #.
On-hook.
Enter destination extension number.
Or enter outside line access number
and then outside phone number.
2
0
3
4
5
Cancel
All Calls
Busy
No Answer
Busy/No Answer
Enter required
number.
For "Cancel", go on-hook
directly after entering 0.
Off-hook.
1
2
0
Both Calls
Intercom Calls
Outside Calls
OR
OR
Enter 71.
17
Enter 0 to 2 as
you desire.
OR
destination
extension no.
(max. 32 digits)
outside
phone no.
outside line
access no.
C.Tone
For KX-UT series:
Press ENTER.
OR
For S-PS:
Press CALL.
for KX-UT series:
Press ENTER.
OR
for S-PS:
Press CALL.
After entering 0 for "Cancel",
Go on-hook
For non-KX-UT series SIP phone users
a. The following features are available for SIP phone users:
User Manual 7
Feature Highlights