Feature Guide References
4.2.4.2 Calling/Connected Line Identification Presentation
(CLIP/COLP) and Calling/Connected Name
Identification Presentation (CNIP/CONP)—by QSIG
Class of Service (COS)
• 2.1.8 COS Programming
• [602] Class of Service
Feature Guide References
3.2.1.11 Class of Service (COS)
Dial Type Selection
• [410] LCOT Dialling Mode
• [411] LCOT Pulse Rate
• [412] LCOT DTMF Minimum Duration
Feature Guide References
2.5.4.4 Dial Type Selection
Direct In Line (DIL)
• [450] DIL 1:1 Destination
Feature Guide References
2.1.1.2 Direct In Line (DIL)
Direct Inward Dialling (DID)/Direct Dialling In (DDI)
• [451] DID Number
• [452] DID Name
• [453] DID Destination
Feature Guide References
2.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Direct Inward System Access (DISA)
• [209] DISA Delayed Answer Time
• [210] DISA Trunk-to-Trunk Call Prolong Time
• [211] DISA Intercept Time
• [475] DISA Silence Detection
• [476] DISA Continuous Signal Detection
• [477] DISA Cyclic Signal Detection
• [604] Extension Intercept Destination
• [730] Outgoing Message (OGM) Floating Extension Number
• [731] Outgoing Message (OGM) Name
• [732] DISA Security Mode
Feature Guide References
2.16.1 Direct Inward System Access (DISA)
58 PT Programming Manual
Feature Programming References
To Next Page
Loading...
