Panasonic KX-TA308 - Feature Buttons

Operation for the KX-TA308/624/824
18
*
1
You can use the last number stored in the PBX to make calls (Last Number Redial).
However, in this case the number will not be stored as a new entry in the Outgoing Call Log.
To display the last number you dialed, press .
Desired Function Operation
To store
To dial
personal speed
dial no.
personal speed
dial no.
Redial *
1
One-touch
Dialing
Calling an
operator
Speed Dialing
(Personal)
To program
To dial
phone no.
desired no.
Speed Dialing
(System)
system speed dial no.
To dial
Making Calls
OR
#
#
2
2
2
idle F-Key (0-9, , #)
X
OR
One-touch Dialing Key (0-9, , #)
X
idle F-Key
One-touch Dialing Key
Calling back
a caller using
the Incoming
Call Log
(KX-TA624/
824 only)
To program
Assign as Caller ID
Indication—Personal
Assign as Caller ID
Indication—Common
To dial
OR
idle F-Key (0-9, , #)
X
OR
Caller ID Indication—
Personal/Common Key
(0-9, , #)
X
idle F-Key
desired Incoming
Call Log *
Caller ID Indication—
Personal/Common Key
OR
Caller ID Indication—
Personal/Common Key
(0-9, , #)
X
Caller ID Indication—
Personal/Common Key
1
6
6
9
0
0
0
* Caller ID is displayed for about 20 seconds. If you press during that time period,
the display goes blank until the time expires.
While Caller ID is displayed or the display is blank,
you can only make a call using a key other than .
To return to the standby display, press then press .
1