2.1 PT Programming
14 PT Programming Manual
2.1.2 Entry Values
Throughout this manual, maximum entry values are shown for each programming item, as shown in
the example below.
Slot and Port Values
Available Slot Entry Values
Enter slot numbers as two-digit numbers (e.g. "04" for slot 4).
Available Port Entry Values
Enter values as two-digit numbers (e.g. "04" for port 4).
Slot Number Supported Cards
01 Pre-installed Hybrid Ports
02–04 LCOT4, HLC4, PLC4 cards
05–06 PLC8 card
08–09 DPH4 card
Card Type Port Number Related Programming
DPH4 01–04 [72x]
HLC4 01–04 [601]
LCOT4 01–04 [400] [409] [41x] [450]
PLC4 01–04
[601]PLC8 01–08
Pre-installed Hybrid Ports 01–04
Disable/
Enable
[351]
01–10
Carrier Table No.
Trunk Group No.
01–64
STORE
STORE
END
SELECT
To Next Page
Loading...
