Panasonic KX-TCD300FXS

8 OPERATIONS
8.1. Turning the Power On/Off
Power on
Press [
] for about 1 second.
· The display will change to the standby mode.
Power off
Press [
] for about 2 seconds.
· The display will go blank.
8.2. Setting the Date and Time
Important:
· Confirm that the AC adaptor is connected.
· Ensure that
is not flashing. If the handset is in screen saver mode, is not displayed. Press [ ] to turn the display
on.
Note:
· To correct a digit, press
or to move the cursor, then make the correction.
· The date and time may be incorrect after a power failure. In this case, set the date and time again.
8.3. Redialling
Previously dialled phone numbers (each 24 digits max.) can be redialled.
8.3.1. Making a Call Using the Redial List
The last 10 phone numbers dialled are stored in the redial list.
8.3.2. Redialling the Last Number Dialled
25
KX-TCD300FXS / KX-TCD300FXT / KX-TCA130FXS / KX-TCA130FXT